Paslode Brads

Head Types

Lost Head

Most common head type where a hidden fix is required, offers moderate pull through resistance

Brad Head Types Lost Head

Clip Head

Tight collation with improved pull through resistance

Brad Head Type Clip Head
 

Shank Types

Smooth Square

The most common brad shank, provides excellent holding power in most timber applications and reduces splitting

Brad Shank Type Smooth Square

Smooth Rounded

Provides excellent holding power in most timber applications

Brad Shank Type Smooth Rounded
 

Point Types

Chisel

Requires the greatest driving power but almost eliminates timber splitting

Brad Point Type Chisel

Blunt Chisel

Used in DA brads, almost eliminates timber splitting however not suitable for clinching applications

Brad Point Type Blunt Chisel
 

Collation Types

Glue/Adhesive

Paslode manufactures their brads with strict quality control systems. This is to ensure the highest quality standards are always maintained. Paslode brads are perfect for a wide range of finishing applications. 

Corrosion Resistance Classes

The Australian Standard for fastener performance
(AS3566) was introduced in 1988, amended in 1990 and ratified in 2002. It currently lists four classes of corrosion resistance.

Class 1 For general interior use where corrosion resistance is of minor importance

Class 2 For general interior use where significant levels of condensation occur

Class 3 For general exterior applications including treated timbers (not suitable for external coastal regions)

Class 4 For external use in marine and moderately severe corrosive environments, generally within 1km from marine surf, although topography and/or strong prevailing winds may extend this distance

Coatings / Finishes

FinishOther NamesDescriptionClass
Bright Bright Steel Un-plated, bright iron with no corrosion protective coating 1
Copper Copper Flash Thin copper coating generally used for the protection of bright steel staples 1
Electro Galvanised E/Galv

Electromagnetic Galvanising uses electrolysis to draw zinc and chromate onto the surface of bright steel. The result is a thin galvanised layer with a smooth finish, typically up to 10μm (microns)

2
Mechanical Galvanised M/Galv

Nails are coated with zinc by peening powdered forms of the desired coating onto the surface of the nails

2
Galvanised      -

Similar to Hot Dipped Galvanising, the zinc coating is applied by immersing a solid continuous wire feed in molten zinc

3
Armor Galv      -

A corrosion resistant zinc/iron alloy coating with a uniform thickness of 40μm microns. Armor Galv nails are suitable for exterior applications where a traditional HDG or M/Galv fastener is specified

 
Hot Dipped Galvanised HDG

Nails are dipped into hot melted zinc until a surface layer of minimum 50μm of zinc has been created. The thickness of the zinc layer varies from minimum 50μm to typically around 80μm

3
Stainless Steel SS

Manufactured from stainless steel wire providing extreme corrosion resistance.

4
Polymer Coated Dip Coated

A functional resin or glue coating is applied to the nail shank to reduce the required nailing power and also to increase the withdrawal resistance of the nail

-
WHERE TO BUY

FASTENER CHARTS

Brads Compatible with Impulse TrimMaster IM250A-Li Angled Bradder

Brad and Fuel Packs - C Series (16ga)

Product CodeLengthBrad(Gauge)HeadFinishFuel CellsBox Qty
B20732 32mm Angled(16ga) Lost Zinc Plated 2 2000
B20738 38mm Angled(16ga) Lost Zinc Plated 2 2000
B20780 38mm Angled(16ga) Lost Stainless Steel 2 2000
B20745 45mm Angled(16ga) Lost Zinc Plated 2 2000
B20750 50mm Angled(16ga) Lost Zinc Plated 2 2000
B20785 50mm Angled(16ga) Lost Stainless Steel 2 2000
B20765 63mm Angled(16ga) Lost Zinc Plated 2 2000

 

Brads Compatible with Impulse TrimMaster IM250S-Li Straight Bradder

Brad and Fuel Packs - C Series (16ga)

Product CodeLengthBrad (Gauge)HeadFinishFuel CellsBox Qty
B20623 25mm C series(16ga) Lost Zinc Plated 3 3000
B20650 25mm C series(16ga) Lost Stainless Steel 2 2000
B20625 32mm C series(16ga) Lost Zinc Plated 3 3000
B20627 38mm C series(16ga) Lost Zinc Plated 3 3000
B20654 38mm C series(16ga) Lost Stainless Steel 2 2000
B20629 45mm C series(16ga) Lost Zinc Plated 3 3000
B20630 50mm C series(16ga) Lost Zinc Plated 3 3000
B20657 50mm C series(16ga) Lost Stainless Steel 2 2000
B20632 65mm C series(16ga) Lost Zinc Plated 3 3000

Brad and Fuel Packs - ND Series (14ga)

Product CodeLengthBrad (Gauge)HeadFinishFuel CellsBox Qty
B20640 30mm ND Series(14ga) Lost Zinc Plated 2 2000
B20641 38mm ND Series(14ga) Lost Zinc Plated 2 2000
B20660 38mm ND Series(14ga) Lost Stainless Steel 2 2000
B20642 45mm ND Series(14ga) Lost Zinc Plated 2 2000
B20643 50mm ND Series(14ga) Lost Zinc Plated 2 2000
B20665 50mm ND Series(14ga) Lost Stainless Steel 2 2000
B20645 62mm ND Series(14ga) Lost Zinc Plated 2 2000

Brads Compatible with Impulse IM200-Li C1 Bradder

Brad and Fuel Packs - C1 Series (18ga)

Product CodeLengthBrad (Gauge)HeadFinishFuel CellsBox Qty
B20810 25mm C1 Series (18ga) Lost Zinc Plated 2 2000
B20815 32mm C1 Series (18ga) Lost Zinc Plated 2 2000
B20820 38mm C1 Series (18ga) Lost Zinc Plated 2 2000
B20825 50mm C1 Series (18ga) Lost Zinc Plated 2 2000

Brads Compatible with Pneumatic DA 65.1 Angled Bradder

Fasteners

Product CodeLengthBrad (Gauge)HeadFinishBox QtyOuter
B20185 25mm DA 13 Series (15ga) Clip Head Zinc Plated 3000 12000
B20170 32mm DA 15 Series (15ga) Clip Head Bright 3000 12000
B20188 32mm DA 15 Series (15ga) Clip Head Zinc Plated 3000 12000
B20173 38mm DA 17 Series (15ga) Clip Head Bright 3000 12000
B20191 38mm DA 17 Series (15ga) Clip Head Zinc Plated 3000 12000
B20176 45mm DA 19 Series (15ga) Clip Head Bright 3000 12000
B20194 45mm DA 19 Series (15ga) Clip Head Zinc Plated 3000 12000
B20179 50mm DA 21 Series (15ga) Clip Head Bright 3000 12000
B20197 50mm DA 21 Series (15ga) Clip Head Zinc Plated 3000 12000
B20182 65mm DA 25 Series (15ga) Clip Head Bright 3000 12000
B20200 65mm DA 25 Series (15ga) Clip Head Zinc Plated 3000 12000

Brads Compatible with Pneumatic T250S F16 C Series Bradder

Fasteners

Product CodeLengthBrad (Gauge)HeadFinishBox QtyOuter
B20215 15mm C Series (16ga) Lost Zinc Plated 3000 54000
B20219 19mm C Series (16ga) Lost Zinc Plated 3000 45000
B20225 25mm C Series (16ga) Lost Zinc Plated 3000 45000
B20280 25mm C Series (16ga) Lost Stainless steel 2000 12000
B20232 32mm C Series (16ga) Lost Zinc Plated 3000 36000
B20238 38mm C Series (16ga) Lost Zinc Plated 3000 27000
B20285 38mm C Series (16ga) Lost Stainless steel 2000 12000
B20245 45mm C Series (16ga) Lost Zinc Plated 3000 27000
B20250 50mm C Series (16ga) Lost Zinc Plated 3000 18000
B20290 50mm C Series (16ga) Lost Stainless steel 2000 8000
B20265 65mm C Series (16ga) Lost Zinc Plated 3000 18000

Brads Compatible with Pneumatic LiteLine C1 30 Straight Bradder

Fasteners

Product CodeLengthBrad (Gauge)HeadFinishFuel CellsBox Qty
B20072 15mm C1 Series (18ga) Lost Zinc Plated 5000 100000
B20075 25mm C1 Series (18ga) Lost Zinc Plated 5000 75000
B20094 25mm C1 Series (18ga) Lost Stainless steel 2000 12000
B20077 30mm C1 Series (18ga) Lost Zinc Plated 5000 75000
B20096 30mm C1 Series (18ga) Lost Stainless steel 2000 12000

Brads Compatible with Pneumatic LiteLine C1 50 Straight Bradder

Fasteners

Product CodeLengthBrad (Gauge)HeadFinishFuel CellsBox Qty
B20072 15mm C1 Series (18ga) Lost Zinc Plated 5000 100000
B20075 25mm C1 Series (18ga) Lost Zinc Plated 5000 75000
B20094 25mm C1 Series (18ga) Lost Stainless steel 2000 12000
B20077 30mm C1 Series (18ga) Lost Zinc Plated 5000 75000
B20096 30mm C1 Series (18ga) Lost Stainless steel 2000 12000
B20081 40mm C1 Series (18ga) Lost Zinc Plated 5000 50000
B20083 45mm C1 Series (18ga) Lost Zinc Plated 5000 50000
B20085 50mm C1 Series (18ga) Lost Zinc Plated 5000 45000

Nails Compatible with Pneumatic NT 65.1 T Nailer

T Head Fasteners

Product CodeLengthDiameterFinishPoint TypeBox QtyOuter
B20369 38mm 2.2mm Zinc Plated Chisel 1000 12000
B20370 45mm 2.2mm Zinc Plated Chisel 1000 12000
B20372 50mm 2.2mm Zinc Plated Chisel 1000 12000
B20376 65mm 2.5mm Zinc Plated Chisel 1000 7000

Finish Head Fasteners

Product CodeLengthDiameterFinishPoint TypeBox QtyOuter
B20368 38mm 2.2mm Zinc Plated Chisel 1000 12000
B20382 50mm 2.2mm Zinc Plated Chisel 1000 12000
B20423D 50mm 2.5mm Zinc Plated Chisel 1000 8000
B20424 65mm 2.5mm Zinc Plated Chisel 1000 7000

Note: Zinc Plated brads for internal use only.